Chinese translation for "pressing crack"

夹层
压制开裂
压制裂纹

Related Translations:

lamination crack:  夹层裂纹

cracking sensibility:  裂纹敏感性

cracking capacity:  裂化能力裂化设备的生产量裂化设备生产量

hardening crack:  淬火裂缝淬火裂纹淬裂烧裂硬化龟裂

transverse cracks:  横向裂纹

chill crack:  淬裂激冷裂缝急冷裂纹冷硬裂痕(铸疵)

embrittlement cracking:  脆裂

restraint crack:  约束裂缝

mercury cracking:  汞致晶界腐蚀开裂

cracking conditions:  裂化条件

Example Sentences:

	1.	Punching press cracking of economizer expansion plate 省煤器膨胀板冲压开裂原因分析
	2.	( 2 ) according to the forming model of the deep pull cracks , they can be divided into three classes pulled cracks - , pressed cracks and sheared cracks . ( 3 ) based on the two - dimensional and three - dimensional finite element methods . the following results can be affirmed : in the slope excavating process , the base surface will rebound in the direction of the excavating surface ' s excerior normal . the maximal displacements of the left and right bank are + 3 . 6cm and + 2 . 4cm ; the arch abutment will rebound in the direction of the river valley , the maximal displacements of the two bank are + 3 . 5cm and + 2 . 2cm ; the upstream and downstream surface will rebound in the direction of the normal direction . the maximal displacements are + 2 . 1cm and + 1 . 7cm . ( 4 ) the natural slope is stable ( 3 )通过二维及三维有限元分析得知，左右岸拱肩槽边坡在开挖过程中，开挖底面主要表现为朝开挖面外法线方向发生回弹，左右岸最大位移量分别为+ 3 . 6cm 、 + 2 . 4cm ；拱端面主要表现为向河谷方向发生侧向回弹，左右岸最大位移量分别为+ 3 . 5cm 、 + 2 . 2cm ；上下游坡面主要表现为向临空方向的回弹，左右岸最大位移量分别为+ 2 . 1cm 、 + 1 . 7cm ；开挖使岩体产生由卸荷回弹导致的倾倒拉裂现象。

Similar Words：

"pressing button" Chinese translation, "pressing chamber" Chinese translation, "pressing characteristics" Chinese translation, "pressing cloth" Chinese translation, "pressing conditions" Chinese translation, "pressing cycle(period)" Chinese translation, "pressing cylinder" Chinese translation, "pressing debts" Chinese translation, "pressing defect" Chinese translation, "pressing defence" Chinese translation